Daken Chemical Limited
Product Categories

4-Ethenylphenol Acetate CAS NO.2628-16-2

4-Ethenylphenol Acetate CAS NO.2628-16-2

Introduction A photoresist is a light-sensitive material used in several processes, such as photolithography and photoengraving, to form a patterned coating on a surface. This process is crucial in the electronic industry.The process begins by coating a substrate with a light-sensitive organic...

Product   name:

4-Ethenylphenol   acetate

CAS   NO.:

2628-16-2

Structure:

image001.jpg

Synonyms:

Acetic  Acid 4-vinylphenyl Ester;4-acetoxystyrene;4-acetoxystyrene   Monomer;4-ethenylphenol Acetate;4-ethenylphenol Acetate Monomer;4-vinylphenyl   Acetate;4-ethenyl-phenoacetate;c-908

MF:

C10H10O2

MW:

162.19

Melting   point :

7-8 °C(lit.)

Chemical   Properties:

Clear  colorless liquid

Purity

98%

Capacity:

500KG /month

Package

In  paper drums /Fluoride drums /iron drums /plastic drums/IBC Tank ,etc.

Shipment   method :

By  Sea ,Air ,Courier door to door ,etc.

Storeage:

Under  room temperature ,keep away from direct sun light

Loading  Port :

China  any port ,Beijing ,Shanghai ,Hongkong

Transportation   condition:

Shipped  as non- dangerous chemicals

Application:

Analog  Semiconductors, Light-Emitting Diodes LEDs, Solar Photovoltaics PV

 

Introduction

image003(001).jpg


A photoresist is a light-sensitive material used in several processes, such as photolithography and photoengraving, to form a patterned coating on a surface. This process is crucial in the electronic industry.The process begins by coating a substrate with a light-sensitive organic material. A patterned mask is then applied to the surface to block light, so that only unmasked regions of the material will be exposed to light. A solvent, called a developer, is then applied to the surface.

 

In the case of a positive photoresist, the photo-sensitive material is degraded by light and the developer will dissolve away the regions that were exposed to light, leaving behind a coating where the mask was placed.

 

In the case of a negative photoresist, the photosensitive material is strengthened (either polymerized or cross-linked) by light, and the developer will dissolve away only the regions that were not exposed to light, leaving behind a coating in areas where the mask was not placed.

 

Based on the chemical structure of photoresists, they can be classified into three types: Photopolymeric, photodecomposing, photocrosslinking photoresist.

 

Photopolymeric photoresist is a type of photoresist, usually allyl monomer, which could generate free radical when exposed to light, then initiates the photopolymerization of monomer to produce a polymer. Photopolymeric photoresists are usually used for negative photoresist, e.g. methyl methacrylate.

 

Photopolymerization of methyl methacrylate monomers under UV that resulting into polymer

Photodecomposing photoresist is a type of photoresist that generates hydrophilic products under light. Photodecomposing photoresists are usually used for positive photoresist.

 

Photolysis of a dizaonaphthoquinone that leads to a much more polar environment, which allows aqueous base to dissolve a Bakelite-type polymer.

Photocrosslinking photoresist is a type of photoresist, which could crosslink chain by chain when exposed to light, to generate an insoluble network. Photocrosslinking photoresist are usually used for negative photoresist.

 

The Related Products:4-Ethenylphenol acetate CAS NO. 2628-16-2

1. 1-Methacryloyloxy-3-adamantanol CAS NO.115372-36-6

2. 3-Hydroxy-1-adamantyl acrylate CAS NO.216581-76-9

3. 1,3,5-Trimethyladamantane CAS NO.707-35-7

Hot Tags: 4-ethenylphenol acetate CAS NO.2628-16-2, China, suppliers, factory
Related Products
I want to leave a message
Contact Us
Address: Floor 14th,No.9 Inner Ring Road,Zhengzhou,450000,China
Tel: +86-371-55531817
 Fax:+86-371-55531817
 E-mail:inquiry@dakenchem.com
Copyright © Daken Chemical Limited. All Rights Reserved.
Share: