Introduction A photoresist is a light-sensitive material used in several processes, such as photolithography and photoengraving, to form a patterned coating on a surface. This process is crucial in the electronic industry.The process begins by coating a substrate with a light-sensitive organic...
Product name： | 4-Aminoadamantane-1-carboxylic acid |
CAS NO.: | 1057343-95-9 |
Structure： |
|
Synonyms: | 5-Carboxy-2-Aminoadamantane;4-Aminoadamantane-1-carboxylic acid;4-Aminotricyclo[3.3.1.13,7]decane-1-carboxylic acid;4-Aminoadamantane-1-Carbocylic acid |
MF: | C11H17NO2 |
MW: | 195.25818 |
Density : | 1.267 |
Chemical Properties: | White powder |
Purity | 98% |
Capacity: | 500KG /month |
Package | In paper drums /Fluoride drums /iron drums /plastic drums/IBC Tank ,etc. |
Shipment method : | By Sea ,Air ,Courier door to door ,etc. |
Storeage: | Under room temperature ,keep away from direct sun light |
Loading Port : | China any port ,Beijing ,Shanghai ,Hongkong |
Transportation condition: | Shipped as non- dangerous chemicals |
Application: | Analog Semiconductors, Light-Emitting Diodes LEDs, Solar Photovoltaics PV |
Introduction
A photoresist is a light-sensitive material used in several processes, such as photolithography and photoengraving, to form a patterned coating on a surface. This process is crucial in the electronic industry.The process begins by coating a substrate with a light-sensitive organic material. A patterned mask is then applied to the surface to block light, so that only unmasked regions of the material will be exposed to light. A solvent, called a developer, is then applied to the surface.
In the case of a positive photoresist, the photo-sensitive material is degraded by light and the developer will dissolve away the regions that were exposed to light, leaving behind a coating where the mask was placed.
In the case of a negative photoresist, the photosensitive material is strengthened (either polymerized or cross-linked) by light, and the developer will dissolve away only the regions that were not exposed to light, leaving behind a coating in areas where the mask was not placed.
Based on the chemical structure of photoresists, they can be classified into three types: Photopolymeric, photodecomposing, photocrosslinking photoresist.
Photopolymeric photoresist is a type of photoresist, usually allyl monomer, which could generate free radical when exposed to light, then initiates the photopolymerization of monomer to produce a polymer. Photopolymeric photoresists are usually used for negative photoresist, e.g. methyl methacrylate.
Photopolymerization of methyl methacrylate monomers under UV that resulting into polymer
Photodecomposing photoresist is a type of photoresist that generates hydrophilic products under light. Photodecomposing photoresists are usually used for positive photoresist.
Photolysis of a dizaonaphthoquinone that leads to a much more polar environment, which allows aqueous base to dissolve a Bakelite-type polymer.
Photocrosslinking photoresist is a type of photoresist, which could crosslink chain by chain when exposed to light, to generate an insoluble network. Photocrosslinking photoresist are usually used for negative photoresist.
The Related Products：4-Aminoadamantane-1-carboxylic acid CAS NO. 1057343-95-9
1. 1-Adamantyl methacrylate CAS NO.16887-36-8
2. 2-Ethyl-2-adamantyl acrylate CAS NO.303186-14-3
3. 1,3,5-Trimethyladamantane CAS NO.707-35-7
![9-(4,4,5,5-Tetramethyl-[1,3,2]dioxaborolan-2-yl)-10-phenylanthracene CAS NO.460347-59-5](/uploads/201816592/small/9-4-4-5-5-tetramethyl-1-3-2-dioxaborolan-2-yl02074951835.gif)
